uni-dsl安装过程求救

likor_bier

从uni-dsl那儿拿了3盒东西回来，Splitter, Modem 和 linker.
理论上我不要无线网络的话就只要splitter + modem。

安装说明接线完毕，然后安装Thomason Modem的驱动程序。
总是出错，说TCP/IP没有正确，blabla... 这个我估计是问题
所在，有没有人碰到这个问题过？如何处理？
是不是要自己设置TCP/IP，那具体是什么呢，是不是要到中心机房
去问?

安装的VPN好像是新版本，3.6的，所以中心机房的安装说明
好像还是老的。

在新建连接时，其中的连接主机是不是就是RZ给出的那个。
然后用户和密码就是没个人注册的时候拿到的那个号，
然后到网上激活的那个东东。

昨天搞了很久没搞定。

求救其中的关键！ 谢谢！

likor_bier

thanks very much!

likor_bier

sorry to ask you again.

>You are NOT supposed to install driver for an extern modem.

u mean, just to connect all of the hardware
telfonanschluss->splitter->modem->router->computer

and install the vpn which is downloaded for RZ.
Configure the VPN like in the introduction in the
RZ website.

do I need to set up a new internet link?


If you don't use the router, you have to configure PPPOE in your computer.

> 求救其中的关键！
PPPOE is the key.

likor_bier

from Uni-DSL we can get a CD for Thomason Modem. According to your suggestion, we do not need to install something from CD? I have tried to install the driver from the CD (or downloaded from Uni-DSL website), but I can not continue, because there is always error message "1. modem not configured or 2. TCP/IP is not installed".

After setting up a dial-up for the link, I get always the information that "it can not find /connect to vpn-pphp.rwth-aachen.de server". Do you think, it is because of setting TCP/IP DHCP?

thanks a lot.